Say goodbye to leaking water, outdoor LED display is so loaded

LED displays will face many challenges if the environment is outdoors. The LED display will be affected by the bad weather such as high temperature, cold wave, strong wind, rain and so on. If you do not do these work well, the safe operation of the display will be impossible. Today Xiaobian (www.lcf-led.cn) to tell everyone how to install an outdoor LED display will not leak.

First, add backing plate to seal the adhesive: There are many friends in order to save trouble, when installing outdoor LED display, do not add backing plate or backing plate does not sealant, so for a long time, electronic components will definitely enter the water, LEDs for a long time There will be problems with the display. The most feared of electronic components is water. Once the water enters the line, it will inevitably lead to the burning of the line. These problems that can be solved easily cannot be ignored.

Second, the leaking port: If the LED display and the back plate are tightly combined, the leak must be made below; the so-called leaking port is used to leak water. No matter how close the front and back of the LED display are, the water is more or less watery. If there is no water leakage hole in the lower mouth, the water will accumulate over time. If the water leaks, the water will be Flowing away, this can play a very good waterproof effect, and it is also beneficial to extend the service life of the LED display.

Third, the appropriate line: When installing the outdoor LED display, the plug wiring must use the appropriate wire, generally follow the principle of Ningda not small, that is, calculate the total power of the LED display, choose a slightly larger wire, it is best not to Use a good or too small wire, which can easily cause the line to burn, thus affecting the safe operation of the LED display.

Install the outdoor LED display to follow the above three principles, generally can achieve waterproof effect.